Valoraciones (0)
Detalles del artículo
Perfil de curvatura
Gran flotabilidad en nieve virgen
Geometría
Nose ancho y tail estrecho: flotabilidad increíble en nieve virgen
Artículo nº
Suela
- Sinterizada
Características
- Downsize
Compatibilidad
- Standard Inserts
Estilo
- All Mountain
- Freeride
Nivel
- Avanzado
Rigidez
- 6
Flex
- Media
País de producción
- USA
Género
- Hombre
| Talla | 155 | 160 |
|---|---|---|
| Ancho de la cintura (cm) | 26.2 | 26.7 |
| Ancho del nose (cm) | 31 | 31.6 |
| Ancho del tail (cm) | 30.5 | 31.1 |
| Anchura del snowboard | Wide | Wide |
| Canto efectivo (cm) | 118.5 | 122.5 |
| Longitud (cm) (cm) | 155 | 160 |
| Longitud del nose (cm) | 52.5 | 54 |
| Longitud del tail (cm) | 36.5 | 38 |
| Peso del rider (kg) | 68 - 79 | 77 - 91 |
| Radio de curvatura (m) | 6.9 | 7.3 |
| Setback (mm) | 38 | 38 |
Descripción del artículo
Freestyle spirit with freeride genes
The Montano blurs the lines between freestyle and freeriding. As a tech-driven, all-mountain quiver killer, it's made for riders who want to use the whole mountain: it holds precise turns on the piste, stays relaxed on top in powder, and has enough fun in it for a few side hits along the way. That comes down to a custom wood core, two uniquely paired carbon fibreglass sheets and a volume-shifted shape.
Pop, float and control
A carbon mesh system with carbon inserts of different widths sits between the top and bottom fibreglass sheets, giving the board its responsiveness, stability and snap. The wider nose and slimmer tail boost float: the tail sinks slightly and lifts the nose, so you don't nosedive in deep snow. On top of that, the hybrid camber and rocker profile delivers explosive response between your bindings, while the flatter section towards the nose helps you float through powder and crud with confidence.
- Flex: 6 out of 10 (playful to snappy)
- Terrain: park 6/10, resort 9/10, powder 9/10
- Core: balsa x poplar
- Fibreglass: Dura-LT Carbon Fiberglass and Carbon X45 Fiberglass
- Base: sintered
- Sidewalls: thermoplastic ABS
- Resin: plant-based bio resin
- Graphics: water-based inks
Más información
El fabricante se reserva el derecho a cambios. Imagen no vinculante.
Las tablas de snowboard suelen entregarse listos de fábrica con la base encerada y los cantos afilados. Sin embargo, esta supuesta puesta a punto de fábrica no es muy duradera con lo que es necesario encerar adecuadamente tu nueva tabla de snowboard al cabo de unos días y realizar un mantenimiento periódico.